Filter
Top Products
5-2
SECTION 5
TROUBLESHOOTING
PROBLEM:
CONVEYOR WILL NOT HOLD PROPER SPEED
OR WILL NOT RUN AT ALL
Check if conveyor is
jammed on something in
oven.
Check for proper tension of conveyor drive
chain and conveyor belt. Refer to MAINTE-
NANCE Section for checking procedure.
If conveyor still will not run, call your local
Middleby Marshall Authorized Service Agent.
Check that drive sprocket
is tight.
PROBLEM:
OVEN BLOWER AND CONVEYOR OPERATE
BUT OVEN SECTION(S) WILL NOT HEAT
Try restarting the oven section(s) again. If the
oven section(s) will not heat, call your local
Middleby Marshall Authorized Service Agent.
If the oven section(s) do not
reach 200°F (93°C) within 15
minutes, the temperature
controller(s) will flash "FAILSF".
To reset the temperature
controller(s), turn the blower
switch(es) off for 30 seconds.