Filter
Top Products
4-7
SECTION 4
MAINTENANCE
Figure 4-11. Outer Plate Disassembly
3. After removing each air finger, place it in an upright
position to remove the outer plate . Gently, step on the lip
of the finger manifold and pull the outer plate upward to
disassemble it, as shown in Figure 4-11.
NOTE:
The outer plate is stainless steel and may be
cleaned by either soaking in a hot, strong detergent
solution or using a caustic cleaner.
The conveyor belt can also be cleaned in the same way.
4. To remove an inner plate, pull its end away from the
finger manifold, then, lift it out and up, as shown in Figure
4-12.
CAUTION:
DO NOT use caustic cleaner on an
inner plate or a finger manifold, to avoid damage.
5. While the oven chamber is clear, clean it with a vacuum
cleaner; then, wipe it with a damp cloth.
CAUTION:
DO NOT USE A CAUSTIC
CLEANER OR EXCESSIVE WATER WHEN
CLEANING THE INTERIOR OF THE OVEN
CHAMBER.
When cleaning the oven, a non-caustic cleaner, which
removes baked-on grease and carbon from metal and
glass and will not damage the aluminum coating on the
interior oven surface, is recommended.
Figure 4-12. Inner Plate Disassembly