Filter
Top Products
Technical Information
CVA615 Coffee System
5.39 Grinder Assembly – Basic Setting
Refer to Figure 5-46 – Grinder - Apart.
Note:
Before setting the grinder, remove all coffee from the grinder.
1. Install the Felt Ring (Item 11).
2. Install the carriers (Item 10).
3. Install the mounting (Item 7).
4. Install the springs (Item 9).
5. Install the balls (Item 8).
6. Install the Grinding Cone (Item 6), ensure the balls are seated.
7. Install the washer (Item 3).
8. Install the Intake Worm Gear (Item 2), press down, and turn until the
coupling engages.
9. Tighten the Grinding Cone Screw (Item 1)
counter clockwise. (Ensure
the intake worm gear coupling has engaged properly).
Note:
Before setting the grinder, remove all coffee from the grinder.
10. Fit the bracket (Item 3).
11. The blue marking on the carrier (Item 2), has the same position as the
blue marking on the adjustment ring (Item 1); both point toward the
front of the appliance.
12. Turn the Adjustment Ring Clockwise as far as possible.
13. Turn the Adjustment Ring Counterclockwise by 6 settings so that the
Adjustment Lever can be secured at a mid setting.
14. Fit the Adjustment Lever such that the grinder is set to a medium
grinding grade.
15. Tighten the Adjustment Lever Fixing Screws.
16. Push on the handle.
91