Filter
Top Products
Technical Information
CVA615 Coffee System
Service Tip:
Refer to Figure 5-36. To avoid having to hold the Front Plate Assembly
upward while removing the lower screws, a suitable item can be used to
temporarily keep the Front Plate Assembly in an elevated position.
Figure 5-36: Using a Suitable Item to Keep the Front Plate Assembly Elevated
to Access the Screws at the Bottom
27. Position the Drive Assembly so access to the rear cover is possible.
28. Remove the 5 screws that secure the cover.
29. Lift the cover from the Drive Unit.
30. Refer to Section 4.15 – Brew Unit Drives for information on the Drive
Assembly.
81