Filter
Top Products
Technical Information
CVA615 Coffee System
Figure 5-49: Test Jumper Position
4. Release all three coffee buttons.
5. Remove the jumper and reconnect JP25.
6. Press and hold all three coffee buttons. Observe the number
displayed in the bottom right of display (refer to Figure 5-50).
Figure 5-50: Display While in Service Mode
Is the displayed value 30 or higher?
NO YES
Normal operation
Ensure…
Sufficient water is present
The water path is clear
Water lines are not crimped
Heaters, flowmeter, etc. freely
pass water
Water valves fully open
Water line connections are
tight & do not leak
95