Filter
Top Products
Technical Information
CVA615 Coffee System
5.6 Base Plate - Removal
1. Remove the Lid, Mains and Rear Panel – Refer to Sections 5.1 and
5.3.
2. Open the door.
3. Remove the Waste Container.
4. Remove the Water Tank.
5. Check if water is present in the Drip Tray with a finger through the
opening under the water container.
6. If water is present, remove it using a suitable device.
7. Remove the Brew Unit – Refer to Section 5.20.
8. Remove the Coffee Beans from their container.
9. Remove the Base Plate Fixing Screws.
10. Tilt the appliance onto its rear.
11. Remove the Base Plate and disconnect the ground wire.
Figure 5-6: Base Plate - Removal
51