Filter
Top Products
Technical Information
CVA615 Coffee System
5.2 Interference Suppression Filter (Z1) - Removal
1. Perform: Lid removal – Refer to Section 5.1.
2. Remove the Mains Filter Nut (Figure 5-2 - Item 1).
3. Remove the Filter.
4. Disconnect the Mains Filter electrical connections
Figure 5-2: Interference Suppression Filter (Z1) Mounting Location
5.3 Rear Panel - Removal
1. Remove the lid – Refer to Section 5.1.
2. Remove the Mains Filter – Refer to Section 5.2.
3. Remove the fixing screws from the rear panel.
4. Disconnect the ground connection from the rear panel.
5. Remove the Rear Panel upwards.
Figure 5-3: Rear Panel Removal
48