Filter
Top Products
Technical Information
CVA615 Coffee System
4.6 Brewing Procedure
1. The grinder fills the dispenser housing until full (as determined by the
dispenser switch).
2. The grinder is then switched off.
3. The dispenser flap opens twice (two clicks) via the dispenser solenoid
assembly.
4. The ground coffee then falls into the brew unit via the funnel.
Figure 4-4: Brew Unit Filters
1 Funnel
2 Percolator Chamber
3 Bottom Filter
Refer to Figure 4-5 – Brew Unit Components.
5. The drive tilts the percolator chamber and raises it to the brewing
position. The ground coffee is compressed between the Top Filter
(Item 2) and Bottom Filter (Item 5).
6. Water then flows through the Water Nozzle Socket, (Item 4). The
pump forces the hot water through the Brew Unit and the compressed
grounds (Pos 3). Coffee exits the top of Brew Unit via the Outlet (Item
1).
23