Filter
Top Products
Page
71
Select the 'Services (Local)' item in the left hand pane, and then scroll down to the 'SNMP
Service' item in the right hand pane. Double click the 'SNMP Service' item, and then go
to the 'Traps' tab.
You can now add, delete or edit the IP addresses where traps are sent. You'll probably
see a single entry in the 'Trap Destinations' list box, called 'localhost'. 'localhost' is the IP
address of the 'local' machine, which means that traps are sent and received by the local
machine, and do not go to other machines. You can enter multiple IP addresses, so that
the traps are sent to multiple machines.
MIBs for OmniTek products may be downloaded from the Support section of the OmniTek
website, www.omnitek.tv