Taylor C300 Freezer User Manual


 
11
Model C300 Important: To the Operator
Section 5 Important: To the Operator
Figure 5
ITEM
DESCRIPTION
1 Product Light - Left Side
2 Control Switch
3 Keypad - Left Side
4 Liquid Crystal Display
5 Keypad - Right Side
6 Product Light - Right Side
Control Switch
The control s witch is located at the top left corner of
the control channel. When placed in the ON position,
allows S LUSHTECH operation.
Liquid Crystal Display
The L iquid Crystal Dis play (LCD) is located on the
front control panel. The LCD is used to show the
current operating mode of the freezing cylinders.
The L CD also indicates whether there is enough
syrup, CO2, and water being supplied to the freezer.
If an error in the machine operation occurs, a
warning tone will s ound and the word “FAULT” will
flash on the third line o f the display.
Operational Mode Display
The d isplays below illustrate the Operational Mode
Displays. T his information appears on the LCD
during normal operation.
When the unit is plugged into the wall receptacle
and t he control switch is in the ON position, this
screen appears.
SAFETY TIMEOUT
ANY KEY ABORT
This display will remain on the LCD for 60 seconds
unless a key is pressed. When any key is pressed
(or 60 seconds passes), the next screen appear s.
OFF MODE OFF
OK SYRUP OK
CO2- OK WATER- OK
Note: Syrup, CO
2
and water are satisfied.