Filter
Top Products
21
Model C300 Operating P rocedures
Step 9
Snap the draw valve handle onto the door spout.
Align the hole in the draw valve with the slot in the
draw handle.
Figure 15
Step 10
Slide the pivot pin through the draw handle and into
the d raw valve. P lace the draw handle slide o ver the
opening in the draw handle and the pivot pin.
Figure 16
Step 11
Secure the assembly with screws.
Figure 17
Step 12
Insert the spring into the front of the door spout.
Figure 18
Step 13
Place the threaded c ap on the end of the draw valve
cavity. Turn the cap clockwise until it is secure.
Figure 19
Step 14
Place the two o- rings on the prime plug and lightly
lubricate.
Figure 20