Filter
Top Products
22
Model C300Operating P rocedures
090417
Step 15
Install the prime plug.
Figure 21
Step 16
Place the large o- ring i nto the door groove and
lightly lubricate.
Figure 22
Note: Every four months or less, discard the
o- rings and install new o- rings.
Step 17
Install t he front bear ing. Do not lubricate the front
bearing.
Figure 23
Step 18
Install t he freezer door. Position the door on the four
studs on the front of the freezing cylinder. Firmly
push the door into place. Install the four handscrews
on t he studs and finger- tighten them equally in a
criss- cross pattern to insure that the door is snug.
Do not over- tighten the handscrews.
Figure 24
Repeat these steps for the other freezing cylinder.