Thermador PRD30 Range User Manual


 
English 38
Before Calling For Service
Before calling for service, check the following to avoid
unnecessary service charges.
Be sure to check these items first:
Is there a power outage in the area?
Is the household fuse blown or the circuit breaker
tripped?
Is the range disconnected from the electrical supply?
If the Burners do not Ignite
Are the burner caps properly aligned and seated in the
burner bases?
Are the burner ports clogged?
Is a fuse blown or is the circuit breaker tripped?
Is the manual shut-off valve closed, preventing the flow
of gas?
Data Rating Plate
The data rating plate shows the model and serial number of
your range. It is located under the front edge of the range's
cooktop, and is visible when the oven door is open (See
illustration).
The electric wiring diagrams and schematics in the toe kick
area should not be removed except by a service technician.
Replace after service.
CAUTION:
Before removing the toe kick panel, disconnect
the range from the electrical power supply.
Reinstall the toe kick panel before reconnecting
the range to the power supply and operating the
range.
Service Information
For handy reference, copy the information below from the
data rating plate. Keep your invoice for Warranty validation.
Model Number
Serial Number
Date of Purchase
Dealer’s Name
Dealer’s Phone Number
Service Center's Name
Service Center’s Phone Number
Also, enter this information on the Product Registration
Form included with this product, then mail it to the indicated
address.
Figure 29: Rating Plate and Wiring Diagram Locations (oven
door not shown)
Rating plate(s) located
under front edge of
cooktop.
Wiring/schematic dia-
grams placed behind toe
kick panel.