Filter
Top Products
OVEN CONTROLS AND COOKING
13
Overview of the Info Mode
The INFO MODE serves four main purposes:
1. To display oven information.
2. To provide access to
TEST MODE and additional
diagnostic tools for service technicians.
3. To turn oven options and features on/off.
4. To update oven settings.
To access the
INFO MODE
, simply press the Info key
when the oven is either off or cooling down.
The
INFO MODE consists of two screens. To toggle
between screens, press the Up key or Down key.
From screen 1 of the
INFO MODE (Figure 8):
- View the oven serial number
- View the oven software version
- View the menu part number and revision
- View the last temperature selected to cook
- View the electrical compartment temperature
- View the cook counter, total cook time,
magnetron time, and total oven on time
- View the operating voltage (North America
models only)
- Access the fault log
- Access service phone numbers
- Reset the oven
From screen 2 of the
INFO MODE (Figure 9):
- Access
TEST MODE
- Access the “Options” screen
- Set the language (not available on all models)
- Set the date/time
- Access the “Load Menu” screen
Viewing Cook Counter/Time Logs
From screen 1 of
INFO MODE, press the R1 soft key:
- Once to display the cook counter.
- Twice to display total cook time.
- Three times to display total magnetron time.
- Four times to display total “oven on” time.
Viewing the Fault Log
Figures 10-11. This log is read-only. To zero the fault
counters, see page 15. For more information on
faults, see pages 37-38.
From screen 1 of the
INFO MODE, press the R3 soft
key to view the fault log (Figure 10). To view a
detailed log of each fault occurrence (Figure 11),
press the soft key adjacent to the fault code.
Viewing the Service Numbers
From screen 1 of the INFO MODE, press the R4 soft
key to view the phone numbers for TurboChef
Technical Support.
MENU P/N AND REV
INFO 1
SOFTWARE VERSION
LAST COOK: 500F
ELECTRICAL: 84F
S/N: i5-DXXXXXX
FAULT LOG
208 VAC
SERVICE NUMBERS
RESET OVEN
COOKS: 257
SET LANGUAGE
INFO 2
SET OPTIONS
SET DATE/TIME
TEST MODE LOAD MENU
Figure 8: Info Mode Screen 1
Figure 9: Info Mode Screen 2
F6: EC OT
F8: HX RISE LOW
F1: BLOWER
F2: LOW TEMP
F3: MAG C LOW
F4: MONITOR
F5: MAG OT
FAULT LOG
8
0
0
0
0
F7: RTD OPEN
0
0
0
Figure 10: Fault Log
07/14/07 05:22
F1 FAULT DETAIL
07/14/07 13:54
07/14/07 22:07
07/15/07 08:36
07/18/07 14:35
09/26/07 17:42
12/04/07 20:18
MORE
Figure 11: Fault Detail
R1
R2
R3
R4
R5
L1
L2
L3
L4
L5
R1
R2
R3
R4
R5
L1
L2
L3
L4
L5
R1
R2
R3
R4
R5
L1
L2
L3
L4
L5
R1
R2
R3
R4
R5
L1
L2
L3
L4
L5