Filter
Top Products
14 INFO MODE
Resetting the Oven
Resetting the oven is one way to potentially clear an
error message, should one occur. From screen 1 of
the
INFO MODE, press the R5 soft key.
Turning Oven Options On/Off
Figure 12.
From screen 2 of the
INFO MODE, press the L2 soft
key to access the “Options” screen. When
prompted, enter the password 9 4 2 8 and press
the Enter key.
From the “Options” screen, the following oven
options can be turned on or off:
- “Adjust Time” screen (page 11 for more details)
- “Cook More” screen (page 12 for more details)
- Edit Mode (page 19 for more details)
- “Load Menu” screen (page 17 for more details)
- Demo Mode (TurboChef use only)
- DHCP (TurboChef use only)
Setting the Language
NOTE: Not available on some oven models.
From screen 2 of the
INFO MODE, press the L3 soft
key to set a different language. Each time L3 is
pressed, a different language is selected in the
following order: English (default), Spanish, French,
German, Portuguese, Italian, Russian, Greek,
Polish.
Setting the Date/Time
Figure 13.
Having an accurate date and time is important for
logging oven counts, diagnostics, and fault
conditions, should any occur. The oven time and
date are set at the time of manufacture; however,
the operator may at some point be required to
make an adjustment.
From screen 2 of the
INFO MODE, press the L4 soft
key to access the “Set Date/Time” screen.
To set the date and time,
1. Use the L3 and R3 soft keys (middle left and
middle right) to navigate between fields.
2. Use the numeric keypad to enter the month,
day, and year, followed by the hour and minute.
NOTE: The clock is a 24-hour clock (e.g., 20:30 =
8:30 PM).
3. Select “Save” to save your changes or “Cancel”
to cancel and exit the screen.
NOTE: The oven will not retain the time if it is left
unplugged for two or more weeks.
EDIT MODE
OVEN OPTIONS
COOK MORE
LOAD MENU
DEMO MODE
ADJ TIME DHCPOFF
ON
ON
OFF
ON
OFF
Figure 12: Options Screen
R1
R2
R3
R4
R5
L1
L2
L3
L4
L5
_
SET DATE/TIME
0 9 / 2 9 / 0 8 2 0 : 3 0
MM / DD / YY HH:MM
CANCEL
SAVE
<>
Figure 13: Set Date/Time
R1
R2
R3
R4
R5
L1
L2
L3
L4
L5