Filter
Top Products
A-8
APPENDIX - REPLACING OVEN COMPONENTS
Figure
Reference #
Item Description Item Part Number Hardware Description Hardware Part Number(s)
1 Capacitor, High-Voltage 100232 None None
2 Capacitor Clamps 100134 Screw, Sh Mtl #8 x 1/2, Serrated PHTRH 101688 (qty 2)
3 Control Board CON-7002 Nut, Keps, Hex, #6-32, Ext Tooth, Cres 102961 (qty 4)
4 Cooling Fan (Exterior) TC3-0433 Screw, Sh Mtl #8 x 1/2, Serrated PHTRH 101688 (qty 2)
5 Cooling Fan (Interior) TC3-0433 Screw, #8-32 x 2 1/2 Lg, PPHD, SS 101661 (qty 2)
6 Cooling Fan Finger Guard 100086 Screw, Sh Mtl #8 x 1/2, Serrated PHTRH 101688 (qty 2)
7 Cooling Fan, Magnetron 100083
A) Screw, #10-32 x 2 1/4, PPH, SS
B) Washer, Lock, #10 Int Tooth, Cres
A)101484 (qty 3)
B) 102290 (qty 3)
8 Cooling Fan (Magnetron) Bracket I5-9263 Screw, Sh Mtl #8 x 1/2, Serrated PHTRH 101688 (qty 4)
9 Diode, High-Voltage 100481 Screw, Sh Mtl #8 x 1/2, Serrated PHTRH 101688 (qty 2)
10 Display 103360 Nut, Keps, Hex, #4-40, Ext Tooth 102960 (qty 4)
11 Motor Controller 100446 Screw, Sh Mtl #8 x 1/2, Serrated PHTRH 101688 (qty 4)
12 Smart Card/USB Port CON-7005
A) Standoff, Round, .12 ID, .25 OD x .375”
B) Nut, Keps, Hex, #4-40, Ext Tooth
A) 101923 (qty 4)
B) 102960 (qty 4)
13 Stirrer Hub 104132 Set Screw (Provided) N/A
14 Stirrer Motor I5-9025 Screw, M4 x 0.7 x 8, PPHD, Int Tooth, SS 101672 (qty 2)
15 Stirrer Motor Bracket I5-9075 Screw, M4 x 0.7 x 8, PPHD, Int Tooth, SS 101672 (qty 2)
16 Stirrer Shaft I5-9151 None None
17 Thermocouple, EC 700-1199 None None
18 Thermostat, Cooling Fans 102086 Screw, #6 x 1/2, PPHD, Drill Point, SS 101687 (qty 2)
19 Thermostat, High-Limit 102075 Screw, M4 x 0.7 x 8, PPHD, Int Tooth, SS 101672 (qty 2)
20 Transformers, Filament NGC-3061-1 Screw, Sh Mtl #8 x 1/2, Serrated PHTRH 101688 (qty 4)
21 Transformers, High-Voltage NGC-3062-1 Screw, Sh Mtl #8 x 1/2, Serrated PHTRH 101688 (qty 4)
Figure A-6: Top Cover Detail
3
10
12
17