Filter
Top Products
EDIT MODE
21
Changing Recipe Settings
Recipe settings consist of the following:
- Up to eight “events” or stages of the cook cycle.
- Cook time.
To change recipe settings,
1. Place the oven in
EDIT MODE (see page 14).
2. Access the “Food Group” screen (page 20).
3. Select a recipe to edit (Figure 24).
4. Use the Down key to move the cursor to the
desired “Event Setting” field (Figure 25).
NOTE: To help make navigation easier, the
currently-selected field will be displayed in the
top-right corner of the display. In Figure 25, the
cursor is in the %TIM column.
5. Use the number keys to adjust event settings:
- % Time (0-100% in 1% increments). The
sum of the percentages across eight events
must equal 100.
- % Top Blower (10-100% in 10% incr.)
- % Bottom Blower (10-100% in 10% incr.)
- % Microwave (0-100% in 10% incr.)
6. Use the Down key to move the cursor to the
“Total Time” field.
NOTE: To help make navigation easier, the R4
“Time” soft key jumps the cursor to the total time
field.
7. Use the number keys to adjust the cook time.
8. Press the R3 soft key to save changes.
NOTE: For the save to take effect, the cursor must
be advanced past the field that was last edited.
9. If desired, press the R5 soft key to test-cook
the new settings. In doing so, the oven may
require additional warmup time.
10. When all editing is complete, return to the
“Options” screen and turn off the
EDIT MODE
(see page 14). This will allow access into the
regular cook mode.