Filter
Top Products
WOLF E SERIES BUILT-IN OVEN OPERATION
CONVECTION MODE
IMPORTANT NOTE:
For double ovens,
Convection mode can only be used in the
upper oven.
How Convection mode works:
Dual convec-
tion fans, each with a heating element, operate
from the back of the oven to move the heated
air throughout the entire oven cavity. Uniform
air movement makes it possible to multi-level
rack cook in this mode. The heat is cycled on
and off to maintain the temperature, resulting
in evenly browned food. The temperature
probe may be used in this mode.
WOLF TIPS FOR SUCCESS
For Convection mode:
Always preheat for
Convection mode
.
Use low-sided, uncovered pans to cook
foods.
A 356 mm x 406 mm baking sheet is an
optimum size. Allow at least 25 mm
between edge of pan and walls of oven.
Reduce standard recipe temperatures by
4˚C in this mode.
Pans do not need to be staggered when
cooking on more than one rack.
Baking time may be less than expected;
check doneness 5 to 10 minutes early.
SETTING CONTROLS
For Convection mode:
1)
Touch
CONVECTION
.
2)
Oven temperature is preset at 165˚C. Oven
begins to heat after five seconds. To change
oven temperature from 165˚C, immediately
enter another temperature using the
number pads.
3)
Touch
ENTER
to start the cooking mode
immediately, otherwise the oven will auto-
matically start the mode in 10 seconds if
there is no action.
4)
Add food when the chime signals that the
oven has reached preheat temperature.
5)
If the temperature probe is used, follow
Temperature Probe feature
directions on
pages 28–29.
6)
If the timer is set, the oven will chime when
the cooking time is finished. If the timer is
not cleared, it will continue to chime every
10 seconds.
7)
Remove food. Always use dry pot holders
when removing hot pans from the oven.
8)
Touch oven
OFF
to end this mode.
20