Filter
Top Products
18
WOLF CONVECTION MICROWAVE INSTALLATION
Electrical outlet
ELECTRICAL REQUIREMENTS
The electrical outlet should be readily
accessible so that the unit can be
unplugged easily in an emergency. Or it
should be possible to isolate the oven
from the supply by incorporating a
switch in the fixed wiring in accordance
with the wiring rules.
The socket should not be positioned
behind the cupboard.
The best position is above the cupboard,
see (A). If connection is to be made to
position (A), remove the clip from position
15 on the rear of the oven (see page 13)
and use the clip to secure the power supply
cord to the top of the housing unit (see
page 17). When not connecting the power
supply cord to position (A), the power
supply cord should be routed under the
oven.
Connect the appliance to a single phase
230-240 V/50 Hz alternating current via a
correctly installed earth socket. The socket
must be fused with a 16 A fuse.
The power supply cord may only be
replaced by an electrician.
Before installing, tie a piece of string to the
power supply cord to facilitate connection
to point (A) when the appliance is being
installed.
When inserting the appliance into the high-
sided cupboard, DO NOT crush the power
supply cord.
Do not immerse the power supply cord or
plug in water or any other liquid.
ELECTRICAL CONNECTIONS
If the plug that is fitted to your appliance is not
suitable for your socket outlet, you must call
your local service agent.
THIS APPLIANCE MUST BE EARTHED
The manufacturer declines any liability
should this safety measure not be
observed.
(A)