3-132
Catalyst 3750, 3560, 3550, 2975, 2970, and 2960 Switch System Message Guide
OL-8551-04
Chapter 3 Message and Recovery Procedures
SUPQ Messages
Error Message SUPQ-4-CPUHB_RECV_STARVE: [chars].
Note This message applies to Catalyst 3750, 3560, 2975, 2970, and 2960 switches.
Explanation The system has detected that messages directed to the CPU are delayed. [chars] is the
detailed error message.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
“Error
Message Traceback Reports” section on page 2-7.
Error Message SUPQ-4-CPUHB_SLOW_TRANSMIT: [chars].
Note This message applies to Catalyst 3750, 3560, 2975, 2970, and 2960 switches.
Explanation The system is warning you about a slowdown of the transmit interface. [chars] is the
detailed error message.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
“Error
Message Traceback Reports” section on page 2-7.
Error Message SUPQ-4-CPUHB_TX_FAIL: [chars].
Note This message applies to Catalyst 3750, 3560, 2975, 2970, and 2960 switches.
Explanation The system is warning you about the sending interface discarding the heartbeat
message. [chars] is the detailed error message.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
“Error
Message Traceback Reports” section on page 2-7.
