3-3
Catalyst 3750, 3560, 3550, 2975, 2970, and 2960 Switch System Message Guide
OL-8551-04
Chapter 3 Message and Recovery Procedures
ACLMGR Messages
• SDM Messages, page 3-118 (only Catalyst 3750 and 2975 switches)
• SPAN Messages, page 3-118
• SPANTREE Messages, page 3-119
• SPANTREE_FAST Messages, page 3-127
• SPANTREE_VLAN_SW Messages, page 3-127
• STACKMGR Messages, page 3-127 (only Catalyst 3750 and 2975 switches)
• STORM_CONTROL Messages, page 3-130
• SUPERVISOR Messages, page 3-131
• SUPQ Messages, page 3-131
• SW_DAI Messages, page 3-133 (only Catalyst 3750 and 3560 switches)
• SW_MACAUTH Messages, page 3-136
• SW_MATM Messages, page 3-137 (only Catalyst 3750 and 3560 switches)
• SW_VLAN Messages, page 3-137
• SWITCH_QOS_TB Messages, page 3-145
• TCAMMGR Messages, page 3-145
• UDLD Messages, page 3-147
• UFAST_MCAST_SW Messages, page 3-149
• WCCP Messages, page 3-151 (only Catalyst 3750 and 3560 switches)
• WRLSCNTR Messages, page 3-151 (only Catalyst 3750 switches)
ACLMGR Messages
This section contains the access control list (ACL) manager messages. Most messages in this section are
the result of a switch memory shortage, which includes hardware memory and label space but not CPU
memory. Both kinds of memory shortages are described.
Error Message ACLMGR-2-NOMAP: Cannot create ACL Manager data structures for VLAN Map
[chars].
Explanation The ACL manager could not allocate the data structures needed to describe a VLAN
map in a form that can be loaded into hardware. This error is most likely caused by lack of free
memory. [chars] is the VLAN map name.
Recommended Action Reduce other system activity to ease memory demands.
