Filter
Top Products
24
25
Control Panel Messages
ERROR DETECTION
When the ‘START’ button has been pressed to
begin the process and there is a problem relating
to the sensor, the machine will ‘beep’ twice and
then flash the particular error message specific to
the problem.
There are 4 different error messages:
ERROR
MESSAGE
PROBLEM CORRECTION
E:01
If attempting to use the bread machine
shortly after a loaf has been baked, its
interior will still be warm, that is, the sensor
temperature will still be above 40ºC.
Press ‘STOP’ to reset. Open the lid and
remove the bread pan to cool. Always allow
the bread machine sufficient time to cool
before using again.
E:02
Contact your nearest authorised Breville
Service Centre (refer to the back page for
details).
E:03
Contact your nearest authorised Breville
Service Centre (refer to the back page for
details).
E:04
Contact your nearest authorised Breville
Service Centre (refer to the back page for
details).
Care, Cleaning and Storage
Before cleaning your bread machine, switch off
and then unplug from the power outlet and allow
the bread machine to cool completely.
BREAD MACHINE
The inside and outside of the bread machine and
the lid should be wiped with a soft, damp cloth
then dried thoroughly. If over spills such as flour,
nuts, sultanas, etc., occur in the baking chamber,
carefully remove, using a damp cloth. Before re-
using your bread machine ensure that all parts are
completely dry.
NEVER immerse the bread machine or the
bread pan in water.
Note
BREAD PAN AND KNEADING BLADE
The inside of the bread pan and collapsible
kneading blade are coated with a high quality,
non-stick coating. As with any non-stick coated
surface, NEVER use metal utensils or abrasive
cleaners on these items.
To clean the bread pan and blades:
Half fill the bread pan with soapy water (use a
non-abrasive detergent), allow to stand for 10-20
minutes. Remove the kneading blade and clean
both blade and inside of bread pan using a soft
cloth. Be sure to remove any crust or dough that
may become lodged around the drive shaft and
the kneading blade. Take care not to scratch the
non-stick surface on the inside of the bread pan
and the kneading blade.
DO NOT USE HARSH CLEANERS, ABRASIVES,
BRUSHES OR STEEL WOOL.
NEVER WASH THE BREAD PAN OR KNEADING
BLADE IN THE DISHWASHER.
To clean the collapsible blade:
Particular care should be used to clean the hinged
area of the collapsible blade. After soaking in
warm, soapy water for 10-20 minutes, use a
wooden toothpick or thin wooden skewer to
remove any bread residue from the hinged area.
Failure to clean the hinged area may eventually
result in the collapsible blade not working
effectively.
Some discolouration may appear on the bread
pan over time. This is a natural effect caused
by moisture and steam and will not affect the
bread in any way.
Note
STORAGE
When storing the bread machine, switch off and
then remove the power plug from the power
outlet. Ensure it is completely cool, clean and dry.
Place the bread pan and kneading blades into the
baking chamber and close the lid. Do not place
heavy objects on top of the lid. Store the bread
machine upright.
REPLACEMENT BREAD PAN AND
BLADES
Both the collapsible blade and bread pan coating
are operating parts of the machine and as such
are subject to normal wear and tear over the life
of the machine. Depending on your usage of the
bread machine they may need replacement if the
bread begins to stick.
SPARE PARTS
Replacement parts are available from Breville
Spare Parts:
Australia Customer Service: 1300 139 798
New Zealand Customer Service: 0800 253 007