Filter
Top Products
21
Removing the oven door
To facilitate cleaning the oven, the oven door can be removed as follows:
– The hinges (A) are equipped with two moveable locks (B). Lift the lock (B) to release
the hinge.
– Now raise the door upwards and pull it out; to do this, hold the door at its sides next
to the hinges.
– To refit the door, first slide the hinges into their grooves.
– Finally, before closing the door, remember to turn the two moving locks (B) previously
used to release the hinges.
The internal glass panel of the oven door can be removed to enable thorough cleaning, as
follows:
– Open the door completely.
– Remove the two terminals at the top corners of the door using the corresponding
buttons (see detail C).
– Remove the internal glass panel.
After cleaning, refit the internal glass panel, taking care that the lower edge fits below the
tabs at the lower section of the door and ensure correct fixture by means of the rubber
elements. Then insert the two upper terminals until the buttons click into place.
WARNING
– Do not wash any removed parts (terminals and glass) in the dishwasher.
– When refitting the internal glass panel ensure that the screen printed face (opaque
side) of the panel is facing downwards.
Never use the appliance before the internal glass panel has been refitted
completely.
A
B
DETAIL C