Filter
Top Products
24
Installation
Important: installation must be done in compliance with established standards and
regulations. It must be done exclusively by a specialised and licensed technician.
Kitchen unit requirements
For built-in units, the components
(plastic materials and wooden
veneer) must be assembled with
heat resistant adhesive (max
100°C): unsuitable materials and
adhesives can result in warping and
failure of the adhesive. The unit
must allow sufficient room for the
electrical cabling. The unit must be
robust enough to support the
weight of the appliance.
The oven must be securely installed
in the compartment. The oven may
be installed in a column unit or
underneath the top of a modular
unit, so long as sufficient ventilation
is provided.
560 mm
560 mm
595 mm
595 mm
595 mm
595 mm
25 mm
25 mm
595 mm
595 mm
5 mm
5 mm
545 mm
545 mm
550 mm
550 mm
min.
min.
569 mm
569 mm
560 mm
560 mm
575-585 mm
575-585 mm
595 mm
595 mm
10 mm
10 mm
545 mm
545 mm
55 mm
55 mm
545 mm
545 mm
55 mm
55 mm
595 mm
595 mm
595 mm
595 mm
25 mm
25 mm
569 mm
569 mm
5 mm
5 mm