Filter
Top Products
Appendix D-2
Error Messages Appendix D
Error Messages
Error Message Cause/Possible Action
Adjust volume too small In DISPENSE, you have, you have entered a value for “Final
vol.” that is too small.
“Final vol.” > volume of biggest fraction dispensed.
Asp flow missing Re-enter Method, supplying the missing parameter, when
prompted to do so (see DILUTE, DISPENSE, PIPETTE, and
MIX tasks).
Diluent volume missing Re-enter Method, supplying the missing parameter, when
prompted to do so (see DILUTE task).
Disp flow missing Re-enter Method, supplying the missing parameter, when
prompted to do so (see DILUTE, DISPENSE, PIPETTE, and
MIX tasks).
DISP task in wrong place Within a Method, DISPENSE must follow DILUTE or MIX.
To DISPENSE before DILUTE you should create a Method file
containing only the DISPENSE task.
Incorrect flow rates Use flow rates that correspond to the configured syringe
size(s); refer to page 5-31.
Left syr life exhausted! For the Dual-syringe model: piston of left-hand syringe may
need replacing.
LINK method not allowed! You can’t link files that are already linked.
Max sample vol. reached In DILUTE UNKNOWN, you need a larger syringe/transfer-
tubing to measure volumes greater than the maximum
reached with the existing configuration.
Mechanical problem: Help Occurs when the valve or a syringe jams; switch off and
correct the problem:
the syringe and/or valve need servicing (clean or change).
Method does not exist! First, you must create the Method to be linked, then enter its
file number using LINK.
Method used in link file You have attempted to delete a Method number that has been
assigned in LINK. You must delete the file containing LINK,
before deleting the Method.
Method xxx is locked Unlock Method file, to continue with this action.
Mix volume is missing Re-enter Method, supplying the missing parameter, when
prompted to do so (see MIX task).
Nb mixes is missing Re-enter Method, supplying the missing parameter, when
prompted to do so (see MIX task).
No room to copy meth xxx You need to free up space by deleting one or more Methods.
Not enough memory! Reduce the size and/or number of stored Method files.
Error Messages