Filter
Top Products
Model EEE-141,142, 143, 144
3-14. OPERATING INSTRUC-
TIONS FOR OPTIONAL
BULK OIL DISPOSAL
SYSTEM
3-17 1009
1. Connect the female quick disconnect, that is attached to the
hose in the rear of the open fryer, to the correct male quick
disconnect at the wall. Once attached, the hose can remain
connected unless the open fryer is moved. Figures 1 & 2.
“BULK OIL DISPOSE?” in the Special Program Mode or
Set-Up Mode, must to set to “YES” for the Bulk Oil Dispose
System to operate. Also, a password code step (1, 2, 3) can
be added in Special Programming, SP-27.
2. Press and hold (left or right for split vats) until display
shows“*FILTER MENU*”, along with
“1.EXPRESS FILTER?”.
3. Press and release button twice until display shows
“3.DISPOSE”. Press
√√
√√
√ button and display shows“DISPOSE?”
“YES NO”, or enter code 1, 2, 3, if SP-27 is set to YES.
4. Press
√√
√√
√ button and “DRAIN VAT?” YES NO” shows in display
Press X button if drain pan already has oil in it. Skip to step 8.
5. Press
√√
√√
√ button and display shows “OPEN DRAIN”. Pull-out
on drain knob to open drain and display shows “DRAINING”.
Oil now drains from the vat into drain pan.
6. Display shows “VAT EMTY “YES NO”. Verify that vat is
empty, and press
√√
√√
√ button.
7. Display shows “CLN VAT COMPLETE” “YES NO”. Once
vat is clean, press
√√
√√
√ button.
8. Display shows “DISPOSE” and then “
√√
√√
√=PUMP” “X=DONE.
Press
√√
√√
√ button and oil is pumped from the drain pan to the bulk
oil container.
9. When all the oil is pumped from the pan, press X button(STOP)
10. Display shows “DISPOSE” and then “
√√
√√
√=PUMP” “X=DONE.
Press X button and close drain.
11. Display shows “MANUAL FILL VAT” (or “FILL VAT FROM
BULK if equipped), followed by “IS POT FILLED?”, along with
“YES NO”. Fill the vat to the lower indicator line on the rear of
the vat and then press
√√
√√
√ button. See Filling or Adding Oil
instructions from Section 3-3.
Fryer returns to normal operation.
Figure 1
Figure 2