Henny Penny EEE-142 Fryer User Manual


 
Model EEE-141,142, 143, 144
7-1. TROUBLE SHOOTING GUIDE
Problem Cause Correction
SECTION 7. TROUBLESHOOTING
POWER switch ON but
fryer completely inoperative
Control error code “E-10”
Vat is under-filled
Open circuit
Open high limit circuit
JIB is low or empty
JIB oil line is clogged or
collapsed
Filter pan needs cleaned
Plug fryer in
Check breaker or fuse at supply box
Circuit breakers in fryer tripped-Open left
door and reset circuit breakers on fryer;
See below
Reset the high limit by using a small
screwdriver or Allen wrench, gently
pushing it into the hole in the heating
element hinge; if high limit does not reset,
high limit may need replaced
Fill the JIB
Check JIB line
Check JIB tube & connection
Clean filter pan and change paper or pad
209 7-1