Henny Penny EEE-142 Fryer User Manual


 
Model EEE-141,142, 143, 144
6-1. SPECIAL PROGRAM
MODE (Continued)
Audio Tone (SP-5)
Press button and “SP-5” and “TONE” flash in the
left display. Press the or , or use product buttons, to
adjust the tone of the speaker, 2000 being the maximum value
and 50 the minimum.
Liquid or Solid Cooking Oil Used (SP-6)
Press button until “SP-6 MELT CYCLE SELECT”
scrolls in the left display. Unless solid oil is being used in the
vats the right display should show “1.LIQUID”.
If solid oil is used, the unit MUST BE equipped to handle solid
oil. Use the and buttons to change the right display to
“2.SOLID”
Idle Mode Enabled (SP-7)
An Idle Mode allows the oil temperature to drop to a lower tem-
perature when not in use. This savies on oil and utilities.
Press button and “SP-7” and “IDLE MODE
ENABLED?” flash in the left display. Press the or
buttons to choose YES” or “NO”.
With “YES” in the display, press button and “SP-7A” and
“USE ‘0’ FOR IDLE” flashon the left display. Press the
or buttons to select “YES” or “NO”. If “YES” is selected,
an Idle Mode can be programmed in product button .
Press button and “SP-7B” and “AUTOIDLE MINUTES”
flash in the left display. Press the or , or use
product buttons, to set the time (0 to 60 minutes) fryer stays
idle before the auto-idle is enabled.
Ex.,“30” means, if product is not cooked in that vat for 30
minutes, the control automatically cools the oil down to the idle
setpoint temperature
Press button and “SP-7C” and “IDLE SETPT” flash in the
left display. Press the or , or use product buttons,
to set the idle temperature 200
o
to 375
o
F (93 to 191
o
C) .
6-3 909