Filter
Top Products
Model EEE-141,142, 143, 144
6-2. CLOCK SET 1. Press and hold the button for 5 seconds until “LEVEL 2”,
followed by, “SP PROG” and “ENTER CODE” show in the
display.
2. Press the button again and “CLK SET” and “ENTER
CODE” flash in the left display.
3. Enter code 1, 2, 3 (first 3 product buttons).
4. “CS-1 ENTER DATE MM-DD-YY” flashes in the left display.
Use the product buttons to set the date in the right display.
5. Press button and “CS-2 ENTER TIME” flashes in the left
display and the time flashes in the right display. Press the
or , or use product buttons, to change the time.
6. Press button and “CS-2 ENTER TIME” flashes in the left
display and “AM” or “PM” flashes in the right display. Use the
or buttons to choose AM or PM.
7. Press button and “CS-3 TIME FORMAT” flashes in the
left display and “12-HR” or “24-HR” shows in the right display.
Use the or buttons to choose a 12 hour time format
or a 24 hour time format.
8. Press button and “CS-4 DAYLIGHT SAVING TIME”
flashes in the left display. Use the or buttons to choose
daylight saving time for your area: 1.OFF; 2.US (2007 &
after); 3.EURO; or 4.FSA (US before 2007).
The Data Logging, Heat Control, Tech, Stat and Filter Control
Modes are advanced diagnostic and program modes, mainly for
Henny Penny use only. For more information on these modes,
contact the Service Department at 1-800-417-8405 or 1-937-
456-8405.
6-3. DATA LOGGING, HEAT
CONTROL, TECH, STAT,
AND FILTER CONTROL
MODES
609 6-10