Filter
Top Products
– 7 –
LIABILITY.
Installations and repairs which are not carried out by authorized technicians or the use of
non-original spare parts, or any technical alterations to the machine, may affect the
warranty set out in the standard conditions of sale. This does not affect your statutory
rights. Continued product improvement is a Hobart policy, therefore, specifications may
change without notice.
HYGIENE.
It is the responsibility of the mixer operator to maintain the machine in a clean condition to the
highest standards of hygiene to prevent the formation of harmful bacteria. Regular attention
and cleaning will achieve this result.
A good standard of personal hygiene is important for mixer operators. Hair and clothing must
be neat and clean. Hands and fingernails must be thoroughly washed before work commences.
Jewellery should not be worn.
FOREWORD.
Hobart reserves the right to alter the design of its products without prior notice. While every
effort is made to ensure this publication reflects the latest design, the Company cannot
guarantee full compliance.
Take pride in your N50 mixer—keep it clean and in good mechanical and electrical condition.
The information and instructions contained in this manual may not cover all details or variations
in the equipment, nor provide for every eventuality to arise with installation, operation, or
maintenance. If additional information is required, please contact your local Hobart sales
office.
GENERAL INFORMATION.
The N50 mixer is designed to mix food products as detailed on the specification charts (Tables
2 and 3), standing on a standard height work top. The mixer is generally manufactured from
die cast zinc alloy components and a steel rear cover all finished with a standard Hobart paint.
The machine is rated to operate on the electrical supplies shown in Table 1. The mixer is fitted
with a ‘no volt release’ safety feature to prevent automatic re-starting after a supply failure or
disconnection from the mains. The bowl support and guard are interlocked so that when either
are not in their correct operating positions, the mixer will not work. The standard mixer is
delivered with a guard, bowl and ‘B’ beater.