Filter
Top Products
M2540-92000-01 A M2540 Ultrasound System Field Service Manual Page 130
Adjustments: Monitor Adjustment
15. Press the far left monitor button.
Changing the
Boot Sequence
➤ Change the Boot Sequence
1. Change the VGA display height adjustment to show the whole screen. See “Adjusting VGA
Vertical Size” on page 128.
2. Reboot the system.
3. As the system boots up, press the Patient key repeatedly, until the BIOS screen opens.
4. Use the arrow keys to select Boot. Press Enter.
5. Use the arrow keys to select Boot Device Priority. Press Enter.
The Device menu opens.
6. Use the arrow keys to select the drive to boot from:
• Select Removable Dev. for the floppy disk drive.
• Select ATAPI CD-ROM for the CD-ROM drive.
7. Press Enter.
8. Press the THI key to return to the Device menu.
9. Use the arrow keys to select Exit. Press Enter.
10. Press Enter to confirm the changes.
11. Press the power switch to shut down the system. (Don’t let it reboot from the dialog box.)
12. After 15 seconds, press the power switch to start the system.