Filter
Top Products
M2540-92000-01 A M2540 Ultrasound System Field Service Manual Page 64
Installation: System Configuration
9. Press the far left monitor button.
10. On the OSD Main menu, use the two right-hand monitor buttons to select EXIT OSD.
11. Press the far left monitor button to exit OSD.
Printer
Preparation
➤ Preparing the Sony Black-and-White Printer
1. Load thermal paper in the printer’s paper drawer.
2. Set the paper type switch inside the printer’s paper drawer to the loaded paper type. (The
paper type is marked on the paper’s foil wrapper, and on the tube at the center of the paper
roll.)
➤ Preparing the Sony Color Printer
1. Load paper in the printer’s paper tray.
2. Insert the paper tray in the printer.
NOTE The paper tray does not sit flush with the printer’s front.
3. Turn the printer power on, to move the print head from its shipping park position.
4. Load the print ribbon.
NOTE Do not confuse the print ribbon with the cleaning ribbon.
System
Configuration
The following procedures configure the system’s software:
NOTE If the system is to communicate over a network, the customer site’s Network
Administrator must be available to supply configuration data.