Filter
Top Products
16
Models C709 & C717Important: To the Operator
130228
Symbol Definitions
To better communicate in the International arena,
symbols have replaced words on many of our
operator switches, function, and fault indicators.
Your Taylor equipment is designed with these
International symbols.
The following chart identifies the symbol definitions.
= SELECT
= UP ARROW
= DOWN ARROW
=AUTO
= HEAT CYCLE
= WASH (Model C709)
= WASH (Model C717)
=MIXLOW
= MIX OUT
= MENU DISPLAY
= STANDBY
Power Switch
When placed in the ON position, the power switch
allows control panel operation.
Fluorescent Display
The fluorescent display is located on the front
control panel. During normal operation the display is
blank. The display is used to show menu options
and notifies the operator if a fault is detected. On
International models, the display will indicate the
temperature of the mix in the hopper.
Indicator Lights
MIX L OW - When the MIX LOW symbol is
illuminated, the mix hopper has a low supply of mix
and should be refilled as soon as possible.
MIX OUT - When the MIX OUT
symbol is
illuminated, the mix hopper has been almost
completely exhausted and has an insufficient supply
of mix to operate the freezer. At this time, the AUTO
mode is locked out and the freezer will be placed in
the STANDBY mode. To initiate the refrigeration
system, add mix to the mix hopper and touch the
AUTO symbol
. The freezer will automatically
begin operation.
HEAT MODE - When the HEAT MODE symbol
is illuminated, the freezer is in the process of a heat
cycle.
BRUSH CLEAN COUNTER - When the BRUSH
CLEAN COUNTER display has counted down to “1”,
the machine must be disassembled and brush
cleaned within 24 hours.
Standby Symbol
The Standby feature maintains product
temperatures in both the hopper and the freezing
cylinder below 40°F (4.4°C). This feature is useful
during long “No Sale” periods to prevent overbeating
and product breakdown.
To activate STANDBY, enter the Manager Menu
access code (see pageNO TAG.) Remove the air
orifice and turn the inner feed tube so the pin rests
on top of the outer feed tube. When STANDBY is
selected, t he ST ANDBY symbol
illuminates,
indicating the Standby feature has been activated. In
the STANDBY mode, the WASH and AUTO
functions are automatically cancelled.