Filter
Top Products
33
Models C709 & C717 Operating Procedures
Model C709 Freezer Door Assembly (Cont'd.)
Step 2
Slide the three o-rings into the grooves on the draw
valve and lubricate. (See Figure 17.)
Figure 17
Step 3
Lightly lubricate the inside of the top of the freezer
door valve cavity. (See Figure 18.)
Figure 18
Step 4
Insert the draw valve from the top, with the draw
handle slot facing forward. (See Figure 19.)
Figure 19
Step 5
Insert the baffle rod through the beater in the
freezing cylinder. With the door seated on the
freezer studs, install the handscrews, with the longer
ones on top. Tighten equally in a criss-cross pattern
to insure the door is snug. (See Figure 20.)
Figure 20
Step 6
Position the draw handle with the adjustment screw
facing down. Slide the fork of the draw handle into
the slot of the draw valve. Secure with pivot pin.
(See Figure 21.)
Figure 21