Filter
Top Products
Installation
14
Adjustments
Before applying power to the appliance for the first
time, check for the following conditions:
j
All electrical safety provisions have been ad-
hered to and the electrical connections are
correct.
j
The bake enhancer and holder are in their
proper positions.
j
The pan holders are inserted into the oven
cavity.
DOOR ADJUSTMENT
The door catch may be adjusted in two directions,
in and out, and up and down, using the following
procedure:
1. Adjust up and down by loosening the two
bolts holding the catch to the face of the ap-
pliance. See Figure 10 (A).
2. Make adjustments so that the leading face of
the latch is centered in the opening of thehan-
dle assembly.
3. Tighten t he bolts so that there is no further
movement.
4. Adjust in and out by loosening the bolt on top
of the catch. See Figure 10 (B).
5. The adjustment face is stepped so that move-
ment is li mi ted with the bol t tightened properly.
6. The adjustment is correct when the door
closes firmly and no steam leaks from the gas-
ket.
The hinges can also be adjusted as follows:
1. Be certain the latch is adjusted properly.
2. Adjust hinges so that the door back and the
appliance face are parallel. See Figure 10 (C).
3. The adjustment is correct when no steam
leaks through the gasket.
A
B
C
Oven
Door
Figure 10