Breville BOV800 Toaster User Manual


 
25
OPERATING YOUR BREVILLE SMART OVEN™ - TOAST
NOTE
Your customised grill temperature
and time settings will remain in the
memory of the oven until you change
them or unplug the oven from the wall
outlet. When the oven is plugged back
into the wall outlet, the GRILL function
will automatically return to High
Setting, and preset time of ‘:10MINS’.
6. Press the START/CANCEL button
to activate this setting. The button
surround will illuminate red and the
oven alert will sound.
7. The timer will be displayed and
begin to count down in one minute
increments. The temperature and time
can be adjusted during the grilling
cycle by turning the corresponding
TEMPERATURE and TIME dial.
8. At the end of the grilling cycle, the oven
alert will sound three times and the
START/CANCEL button surround will
cease to illuminate.
WARNING
The outer surface of the oven,
including the oven door, is hot during
and after operation. Always use
protective hot pads or insulated oven
mitts when inserting, removing or
handling items from the oven.
9. The grilling cycle can be stopped at any
time by pressing the START/CANCEL
button. This will cancel the cycle and the
button surround illumination will go out.
TOAST FUNCTION
Elements
Top and bottom heating elements cycle on
and off to regulate the correct temperature.
The top middle element is off.
Recommended Rack Position
Middle rack height position.
Optional Settings
FROZEN FOODS button.
The TOAST function browns and crisps
the outside of your bread while keeping the
inside soft. This function is also ideal for
crumpets and frozen waffles.
1. Insert the wire rack into the middle
rack height position. The wire rack
should be positioned with the spokes
facing upwards.
2. If toasting 1-3 slices, centre the slices
on the wire rack. If toasting 4-6 slices,
evenly space them with 2-3 slices at the
front of the wire rack and 2-3 slices at
the back of the rack.
3. Close the oven door. Turn the
FUNCTION dial until the indicator on
the LCD screen reaches the TOAST
function. The top figure on the LCD
screen indicates the preset browning
setting ‘4’, while the bottom figure on the
LCD screen indicates the preset number
of slices ‘4’.