Filter
Top Products
40
OPERATING YOUR BREVILLE SMART OVEN™ - REHEAT
NOTE
Extreme caution should be exercised
when using lids in the oven, as
pressure build up in a covered pan
or dish may cause hot ingredients to
expel or the dish to crack.
3. Close the oven door.
Turn the FUNCTION dial until the
indicator on the LCD screen reaches
the REHEAT function. The top figure
on the LCD screen indicates the
preset temperature of ‘160°C’, while
the bottom figure on the LCD screen
indicates the preset time of ‘:15 MINS’.
The preset
CONVECTION setting
will also be displayed.
COOKIES
4. The reheating temperature and time
can be adjusted before or during the
reheating cycle.
a) The reheating temperature is displayed
as the top figure on the LCD screen.
Turn the TEMPERATURE dial to adjust
the baking temperature in 5ºC increments,
from 50ºC to a maximum of 230ºC (or
in the Fahrenheit mode, 10ºF increments,
from 120ºF to a maximum 450ºF).
b) The reheating time is displayed as the
bottom figure on the LCD screen.
Turn the TIME dial to adjust the
reheating time in one minute increments
up to 1 hour, and in 5 minute increments
between 1 and 2 hours.
NOTE
Your customised REHEAT temperature
and time settings will remain in the
memory of the oven until you change
them or unplug the oven from the
wall outlet. When the oven is plugged
back into the wall outlet, the REHEAT
function will automatically return
to the preset temperature of ‘160°C’,
preset time of ‘:15 MINS’ and preset
CONVECTION setting.
5. Press the START/CANCEL button
to activate this setting. The button
surround will illuminate red and the
oven alert will sound.
6. The timer will be displayed and
begin to count down in one minute
increments. The temperature and time
can be adjusted during the reheating
cycle by turning the corresponding
TEMPERATURE or TIME dial.
7. At the end of the reheating cycle, the
oven alert will sound three times and the
START/CANCEL button surround will
cease to illuminate.
WARNING
The outer surface of the oven,
including the oven door, is hot during
and after operation. Always use
protective hot pads or insulated oven
mitts when inserting, removing or
handling items from the oven.
8. The reheating cycle can be stopped at any
time by pressing the START/CANCEL
button. This will cancel the cycle and the
button surround illumination will go out.