Filter
Top Products
47
CARE, CLEANING & STORAGE
Ensure the oven is turned OFF by pressing
the START/CANCEL button on the control
panel. The oven is OFF when the button
surround illumination goes out. Remove the
power plug from the wall outlet. Allow the
oven and all accessories to cool completely
before disassembling and cleaning.
NOTE
Do not use abrasive cleansers, metal
scouring pads or metal utensils on any
of the interior or exterior surfaces of
the oven, including the crumb tray.
Do not use abrasive cleansers, metal
scouring pads or metal utensils to
clean any of the accessories as they
may damage the porcelain enamel
finish of the baking pan and grilling
rack or scratch the non-stick coating
on the pizza pan.
CLEANING THE OUTER BODY
AND DOOR
1. Wipe the outer body with a soft, damp
sponge. A non-abrasive liquid cleanser
or mild spray solution may be used
to avoid build-up of stains. Apply the
cleanser to the sponge, (not the oven
surface), before cleaning.
2. To clean the glass door, use a glass
cleaner or mild detergent and a soft,
damp sponge or soft plastic scouring
pad. Do not use an abrasive cleanser or
metal scouring pad as these will scratch
the oven surface.
3. Let all surfaces dry thoroughly prior
to inserting the power plug into a wall
outlet and turning the oven ON.
WARNING
Do not immerse the body, power cord
or power plug in water or any other
liquid as this may cause electrocution.
CLEANING THE INTERIOR
1. The walls on the inside of the oven
feature a non-stick coating for easy
cleaning. To clean any splattering
that may occur while cooking, wipe
the walls with a soft, damp sponge. A
non-abrasive liquid cleanser or mild
spray solution may be used to avoid
build-up of stains. Apply the cleanser to
the sponge, not the oven surface, before
cleaning. Avoid touching the quartz
heating elements with the cleanser.
WARNING
Use extreme caution when cleaning
the quartz heating elements. Allow the
oven to cool completely, then gently rub
a soft, damp sponge or cloth along the
length of the heating element. Do not
use any type of cleanser or cleaning
agent. Let all surfaces dry thoroughly
prior to inserting the power plug into a
wall outlet and turning the oven ON.
2. Let all surfaces dry thoroughly prior
to inserting the power plug into a wall
outlet and turning the oven ON.