Filter
Top Products
U s e r I n s t a l l a b l e F e a t u r e s
LifeBook 900 Series from Fujitsu
129
P O I N T
The main battery should only be
removed for storage or service.
To Install a Battery in the Battery Bay:
4.Orient the battery to be installed with the
finger ridge away from the body of your
notebook and the connector toward the body
of your notebook.
5. Align the grooves on the side of the battery
with the tracks in the side of the bay.
(Figure 4-12.)
6.
Slide the battery toward the back of your
notebook until it clicks into place. Make sure
that the battery release button has returned to
its base position against the side of the battery.
To Remove or Install a Battery
in the Battery Bay:
1. Close all files and exit all applications.
2. Turn off power to your notebook, close the
display and remove the AC adapter. (See pages
24–25 for more information.)
3. Turn your notebook upside down with the
bay openings toward you.
To Remove a Battery from the Battery Bay:
4. Slide the battery release button on the bot-
tom right side of the battery bay to your
right. (Figure 4-12.)
5. Slide the battery forward until it is clear of
the compartment. This will require some
force. Use the finger ridge on the bottom
of the battery.
MIDI/JOYSTICK DEVICES
To connect a MIDI/Joystick Device:
1. Close all files and exit all applications.
2. Turn off power to your notebook, close the
display and remove the AC adapter. (See pages
24–25 for more information.)
3. Open the MIDI port cover on the right side
panel of your notebook, (Figure 4-13), by
gently pulling on the bottom edge of the
cover and lifting it up.
4. Align the connector of the adapter cable with
the connector towards the body of your note-
book. (Figure 4-13.)
5. Insert the connector firmly into the port on
your notebook until it clicks.
C A U T I O N
The main battery can not be
warm swapped.