Filter
Top Products
S e c t i o n F o u r
142
■
There is a fast Ethernet port.
■
There are two additional PC
Card slots.
Using Your Notebook
While it is Installed in the Port Replicator
There are a no differences you will notice
between using your notebook in and out of
the Port Replicator.
C A U T I O N
When your notebook is mounted in the
LANdock or Port Replicator it is essentially
a desktop PC not a mobile notebook. DO
NOT unplug the docking device with the
operating system active. You may cause a
loss of data and a system error when you
restart your notebook.
P O I N T
Your notebook comes with the docked
configuration created. You only need to
create the docked configuration if you
modify the default hardware profiles and
are using a LANdock.
Creating the Windows 95 Docked
Configuration (LANdock only)
1. Install your notebook in the LANdock.
2. Turn on the power. The operating system
will automatically begin to configure itself
for “docked mode”operation.
3. When the configuring is complete the screen
will tell you to restart your system.
4. When the restart is complete a little box will
appear indicating that you are in the docked
configuration but the display will not use
the entire screen.
5. To use the entire screen:
a. Go to the Start Menu.
b. Select Settings.
c. Select Control Panel.
d. Select the Display icon by double-
clicking on it.
e. Select the settings tab and change
the resolution to 1024 x 768 pixels.
f. Change the monitor setting to Laptop
Display Panel (1024 x 768).
g. Click on the OK button to activate the
new display settings. Your display should
now occupy the entire screen.
Future docking with Windows 95 can be done
in Suspend mode, Save-to-Disk mode or with
the power off. The system will automatically
detect whether you are docked, or not, when
you resume operation. Undocking should only
be done with power off or in PC Eject mode
for the LANdock or Suspend mode for the
Port Replicator.