Filter
Top Products
– 21 –
Fahrenheit or Celsius Temperature Selection
Your oven control is set to use the Fahrenheit temperature selections, but
you may change this to use the Celsius selections.
Touch the upper oven 1. BROIL HI/LO and BAKE pads at the same time
until the display shows "SF".
Touch the 2. COOK TIME and BROIL HI/LO pads at the same time. The
display will show "F" (Fahrenheit).
Touch the 3. COOK TIME and BROIL HI/LO pads again at the same time.
The display will show "C" (Celsius).
Touch the 4. START pad.
+
+
_________________________________________________________________________________________
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will sound followed by one
beep every 6 seconds until the CLEAR/OFF pad is touched. This continual
6-second beep may be canceled.
To cancel the 6-second beep:
Touch the upper oven 1. BROIL HI/LO and BAKE pads at the same time
until the display shows "SF".
Touch the 2. BROIL pad. The display shows "CONTI BEEP" (continuous
beep). Touch the BROIL pad again. The display shows "SINGLE BEEP".
(This cancels the one beep every 6 seconds.)
Touch the 3. START pad.
+
_________________________________________________________________________________________
Tone Volume
This feature allows you to adjust the tone volumes to a more acceptable
volume. There are three possible volume levels.
Touch the upper oven 1. BROIL HI/LO and BAKE pads at the same time
until the display shows "SF".
Touch the 2. COOK TIME pad. The display will show "2 BEEP". This is the
middle volume level.
Touch the COOK TIME pad again. The display will show "3 BEEP". This
is the loudest volume level.
Touch the COOK TIME pad again. The display will show "1 BEEP". This
is the quietest volume level.
For each time the level is changed, a tone will sound to provide an
indication of the volume level.
Choose the desired sound level (1 BEEP, 2 BEEP, or 3 BEEP).3.
Touch the 4. START pad to activate the level shown.
+
(Continued next page)