Filter
Top Products
– 39 –
Strip Circuit
To remove the lock assembly:
Remove the main rear access panel. (See 1.
Rear
Access Panels.)
Remove the two T15 Torx screws from the front 2.
of the oven that secure the lock assembly in
place.
J17-Pin9
J16
UNLOCKED
5
4
3
2
1
Disconnect
Disconnect
Lock Assembly
4. Slide the lock assembly through the channel and
out through the back of the oven.
3. Disconnect the motor and switch wiring
harnesses from the lock assembly.
Thermal Cut Outs
When either of the 2 thermal cut outs are open, L2 is
cut off from the oven.
The thermal cut outs are rated at:
Upper oven TCO = 177°C/350°F•
Lower oven TCO = 150°C/302°F•
To remove the thermal cut outs:
Remove the main rear access panel. (See 1.
Rear
Access Panels.)
Disconnect the wires, and remove the two 1/4-2.
in. hex-head screws that attach the thermal
switch to the oven.
Upper Oven Thermal Cut Out
Lower Oven Thermal Cut Out
Disconnect
Disconnect
Disconnect
Disconnect