Filter
Top Products
– 40 –
Sail Switch Assembly
The sail switch assembly is located on the back of
the unit, above the cooling fan, and is operated by
the airflow of the fan.
When the cooling fan is in high speed, the sail
should be closed. When the cooling fan is off, the
sail should be open. When the cooling fan is in low
speed, the sail may be open or closed, and the
control ignores the output of the micro switch.
Disconnect
3. Remove the two
1
1/4-in. hex-head screws that
attach the sail switch assembly to the left side
access panel.
Sail Switch
Lock Out Relay
The L2 DLB lockout relay opens the L2 side of the
line to the upper oven heating elements if the upper
oven door is opened.
To remove the lock out relay:
Remove the main rear access panel. (See 1.
Rear
Access Panels.)
Mark and disconnect the wiring to the lock out 2.
relay.
Remove the two 1/4-in. hex-head screws that 3.
attach the lock out relay to the oven frame.
Disconnect
Disconnect
To remove the sail switch:
Remove the main rear access panel. (See 1. Rear
Access Panels.)
Disconnect the wires from the sail switch.2.
Micro Switch
Sail
Cooling Fan
Airflow from the
Cooling Fan Pulls
the Sail Closed