GE PT925 Oven User Manual


 
– 43 –
To replace the oven light bulb:
Use a new 130-volt halogen bulb, not to exceed 1.
50 watts.
Using gloves or a dry cloth, remove the bulb 2.
from its packaging. Do not touch the bulb with
bare fingers.
Push the bulb straight into the receptacle.3.
Disconnect
3. Open the oven door and remove the two 1/4-in.
hex-head screws that attach the light housing to
the oven liner.
4. Pull the oven light housing from the oven liner.
Oven Light Bulbs
CAUTION:
Before replacing the oven light bulb, disconnect
the electrical power to the oven at the main fuse
or circuit breaker.
Be sure to let the light cover and bulb cool
completely.
Do not touch a hot bulb with bare hands or a
damp cloth.
Note: The glass cover should be removed only when
cold. Wearing latex gloves may offer a better grip.
To remove the oven light bulb:
Turn the glass cover CCW 1/4 turn until the 1.
tabs of the glass cover clear the grooves of the
socket.
Bulb
Socket
Tab
Glass cover
Receptacle
3. Disconnect the light assembly wire harness.
Use gloves
or cloth
Receptacle
4. Place the tabs of the glass cover into the
grooves of the socket. Turn the glass cover CW
1/4 turn.
5. Reconnect electrical power to the oven.
2. Using gloves or a dry cloth, remove the bulb by
pulling straight out.