Filter
Top Products
I
The OE-301/302/303 is available from the factory
wired 208, or 220/240
volts, 50 or 60 hertz source.
Refer to the table below for supply wiring and fusing.
Volts Phase
KW
Amps
208 3
11.25 31
208 3
13.50 38
220/240 3
11.25 30132
2201240 3
13.50 33135
400 3
11.25 16
400 3
13.50 20
This fry station must be adequately and safely
grounded. Refer to local electrical codes for correct
grounding procedures. If fry station is not adequately
grounded, electrical shock could result.
A separate disconnect switch with proper capacity fuses
or breakers must be installed at a convenient location
between the fry station and the power source.
Each Hentry Penny Fry Station was completely checked
and tested prior to shipment. However, it is good
practice to check the unit a again after installation.