Filter
Top Products
6-8.
NT
s
4. Connect the labeled wires to their respective positions.
5. Install the control panel per section 6-3.
6. Reconnect power to the fryer and test the fryer for proper
operation.
The gas model fryers have gas burner assemblies per cookpot
consisting of Burner Casting, Orifices, Thermocouples, Pilot
Holders, Main Gas Valve Controls, and Gas Safety Solenoid.
Also, each burner has a main gas shut-off valve, so all burners
do not have to be shut down to work on one burner assembly.
If converting from natural gas to propane or from propane
to natural gas, conversion must be done by a qualified service
technician.
To avoid personal injury or property damage, before starting
this procedure, move the power switch to the “OFF” position,
and unplug power cord from wall receptacle. Turn off the gas
supply to the frypot to be worked on, or a possible explosion
could result.