Filter
Top Products
ny
ode!
The filtering system consists of the motor and filter pump
assembly, filter screen assembly, and tubing.
The two most common causes for a fryer’s inability to pump
shortening is that the pump is clogged with breading or solid
shortening has cooled and solidified in the lines and pump.
Before starting this procedure move MAIN POWER
SWITCH to OFF position. Disconnect main circuit
breaker at the circuit breaker box and unplug service
cord from wall receptacle, or electrical shock could
result.
1. Loosen the four allen head screws on the end of pump and
remove the cover.
2. The inside is now exposed leaving a rotor and five teflon
rollers. Clean the rotor and rollers.
3. To reassemble, place rotor on drive shaft, and place roller
into rotor.
A small amount of shortening might be needed to hold
the bottom roller into place until cover plate is put on.
Make sure O-ring is in proper position on plate.