Check the followinglistto be sure a servicecallis really necessary. A quick reference
of this manual may prevent an unneeded service call.
If grill or surface burner fails to light:
• check 10be sure unitis properlyconnectedto powersupply.
• check fora blowncircuitfuse or a trippedmain circuitbreaker.
• check to be sure burnerportsor ignitionportsare not clogged.
• checkto besureigniterisclicking.Ifigniterdoesn'tclick,turncontrolknobOff and
cleaniginitor. (See p. 46.)
s check to be sure appliance regulatoris set for correctfuel. (See installation
instructions.)
• checkto besure inletpressureis adequate. (Call gascompany.)
if the flame is uneven:
• burner ports may be clogged.
• flame settingmay needto be adjusted. (See p. 13.)
If grill or surface burner flame lifts off the ports:
• shutteronthe mixertubeneedstobe closeduntilflamesettlesonthe burnerports.
(See pp. 12-13.)
If grill or surface burner flame is yellow in color:
• shutteronthemixertubeneedstobe openeduntilyellowdisappears.(See pp. 12-
13)
If nothing on the range operates:
• checkfor a blowncircuitfuse or a trippedmaincircuitbreaker.
• checkif rangeis properlyconnectedto electric circuitinhouse.
If ventilation fan does not operate but everything else on the range
does:
• check behind lower access panel if power cord to blower assembly has been
disconnected.
If ventilation system is not capturing smoke efficiently:
• check on crossventilation in room or make up air.
• excessive amount of smoke is being created; check instructions for grilling,
trimming meats. (See pp. 18-20.)
s outside wall cap may be trapped shut.
• range may be improperly installed; check ducting information. (See p. 9.)
• air filter may be improperly installed (See p. 10.)
50