Taylor C716 Refrigerator User Manual


 
4
Models C708 & C716To the Operator
080714
Section 2 To the Operator
Your freezers have been carefully engineered and
manufactured to give you dependable operation.
These units, when properly operated and cared for,
will produce a consistent quality product. Like all
mechanical products, they will require cleaning and
maintenance. A minimum amount of care and
attention is necessary if the operating procedures
outlined in this manual are followed c losely.
This Operator's Manual should be read before
operating or per forming any maintenance on y our
equipment.
Your Taylor freezer will NOT eventually compensate
for and correct any errors during the set-up or filling
operations. Thus, the initial assembly and priming
procedures are of ex treme importance. It is strongly
recommended that personnel responsible for the
equipment's operation, both assembly and
disassembly, go through these procedures together
in order to be properly trained and to m ake s ure that
no confusion exists.
In the event you should r equire technical assistance,
please contact your local authorized Taylor
Distributor.
Note: Warranty is valid only if t he parts are
authorized Taylor parts, purchased from an
authorized Taylor Distributor, and the required
service work is pr ovided by an authorized Taylor
service technician. Taylor reserves the right to deny
warranty claims on equipment or parts if
non-approved parts or refrigerant were installed in
the machine, system modifications were performed
beyond factory recommendations, or it is determined
that the failure was c aused by neglect or abuse.
Note: Constant research results in steady
improvements; therefore, information in this
manual is subject to change without notice.
If the crossed out wheeled bin symbol is
affixed to this product, it signifies that this product is
compliant with the E U Dir ective as well as other
similar legislation in effect after August 13, 2005.
Therefore, it must be collected separately after its
use is completed, and cannot be disposed as
unsorted municipal waste.
The user is responsible for returning the product to
the appropriate collection facility, as specified by
your local code.
For additional information regarding applicable local
laws, please contact the municipal facility and/or
local distributor.
Compressor Warranty Disclaimer
The refrigeration compressors on this machine are
warranted for the term indicated on the war ranty
card accompanying this machine. However, due to
the Montreal Protocol and the U.S. Clean A ir A ct
Amendments of 1990, many new refrigerants are
being tested and developed, thus seeking their way
into the service industry. Some of these new
refrigerants are being advertised as dr op-in
replacements for numerous applications. It should
be noted that, in the event of or dinary service to this
machine's refrigeration system, only the refrigerant
specified on the affixed data label should be
used. The unauthorized use of alternate refrigerants
will void y our c ompressor warranty. It will be the
owner's responsibility to make this fact known to any
technician he employs.
It should also be not ed t hat Taylor does not war rant
the refrigerant used in its equipm ent. For example, if
the refrigerant is lost during the course of or dinary
service to this machine, Taylor has no obligat ion t o
either supply or provide its replacement either at
billable or unbillable terms. Taylor does have the
obligation to recommend a suitable replacement if
the original refrigerant is banned, obsoleted, or no
longer available during t he f ive year war ranty of the
compressor.
Taylor will continue to monitor the industry and test
new alternates as they are being developed. Should
a new alternate prove, through our testing, that it
would be accepted as a drop-in replacement, then
the above disclaimer would bec ome null and void.
To find out the current status of an alternate
refrigerant as it relates to your compressor warranty,
call the local Taylor Distributor or the Taylor Factory.
Be prepared to provide the M odel/Serial Number of
the unit in ques tion.