D
IAGNOSING AN ISSUE
: Checking Heater B
Step: 1/2
Step: 3Simultaneously press and hold for 1
second to get to the Test Mode Menu
(Screen 1). NOTE: Oven must be in
the O
ff or Cool-down State.
In this example, Heater B is on.
: Testing the Rack Oscillator
Step: 1/2
Step: 3Simultaneously press and hold for 1
second to get to the Test Mode Menu
(Screen 1). NOTE: Oven must be in
the Off or Cool-down State.
In this example, the Rack Oscillator is on.
: Enabling/Disabling the Diagnostic Mode
Step: 2
S
tep: 3
S
imultaneously pr
ess and hold for 1
second to get to the Test Mode Menu
(Screen 1). NOTE: Oven must be in
the Off or Cool-down State.
I
n this example, the D
iagnostic M
ode is
enabled. If it were disabled, the screen
would read “Normal Display” rather
then “Diag Display”.
S
tep: 1
26
